d e s i g n   |   b u i l d   |   p l a y

Tuning Up the Body

Final Cut

As the neck gets closer to being ready in install on the body, we need to be sure the body is going to be ready at about the same time. So we’ve gone back to finish some of the tuning that we had previously left for a later date.

We started by putting the template on the body, then using the new router/shaper setup, we trimmed the edges to the final shape, and then trimmed the control cavities to final shape as well.

The finished piece is just about ready to glue up with the maple top. Just need to add the wiring channel.

It turned out great, and we're starting to envision the finished guitar.

<< Previous Post   - - - - - - -   Next Post >>